In addition to the manual assembly methods, there are various systems for an automated mechanical assembly operations, among them are:
Special purpose machinery generally consist on a series of workstations, which are added in portions and/or bonding operations are executed.
Programmable assembly systems are used to produce a limited variety of different ensembles. Often used industrial robots, either as workstations under multiple or a single robot in a season.
To facilitate automated assembly follow these points:
An idler hauling machine is a device that performs two cuts or "resaques" on wooden planks and beams that are placed on the platforms of the same material that guides a forklift to handle them. These cuts must be made usually from 9"skid has a length of 48 inches the resaques should go to 4 inches from the ends. The machine consists of a load platform or table, which slides on rails powered by a hydraulic piston positioned under the table plate. Cutting is performed by two circular cutters placed above the horizontaltable.
It is a recognized phytosanitary measure for wood packaging material according to the Mexican Official Norm "NOM-EM-144 SEMARNAT-2003".
Involves the application of heat to the timber (Dais) without bark that achieves a minimum temperature of 133°F to the center of the table greater thickness, for a minimum of 30 minutes.
Zoe Maderera y Vidrios de RÃo Bravo
has great presence in the domestic and international market as one of its main customers are in the U.S. Therefore we have several guidelines and quality control systems, so that our product can be exported to the United States.